products categories
contact us
- If you have questions, please contact us, all questions will be answered
- Tel : 18030236818
- Fax : +86-592 5237901
- Email : dexing@china-dexing.com
DXGM-5 Fluxgate Magnetometer
DXGM-5 Fluxgate Magnetometer is a digital relative recorder to continuously measure and record magnetic field D, H, Z changes in the time. The system mainly consists of the fluxgate sensor excitation and analog signal processing circuit, analog-digital conversion circuit, GPS receiver circuit, liquid crystal display circuit, and power supply circuit and other components.
contact nowDXGM-5 Fluxgate Magnetometer
Production introduction
DXGM-5 Fluxgate Magnetometer is a digital relative recorder to continuously measure and record magnetic field D, H, Z changes in the time. The system mainly consists of the fluxgate sensor excitation and analog signal processing circuit, analog-digital conversion circuit, GPS receiver circuit, liquid crystal display circuit, and power supply circuit and other components. The realization of D, H, Z three components of the data collection, processing, storage, observation curve of real-time display, network communications, instrument calibration and other objectives. DXGM-5 fluxgate magnetometer is a digital magnetometer. The instrument moniters the temperature changes of the measuring point while measuring D, H, Z changes. The instrument uses GPS timing, real-time display geomagnetic threecomponent curve. The instrument has absolute measurement and automatic compensation function, with the probe miniaturization, wide band, large dynamic, high sampling rate and large capacity data storage, at the same time with TCP / IP network data communication, USB mobile hard disk storage, low power consumption and temperature Coefficient and other characteristics.It is mainly applied to geomagnetic observation stations.
Technical parameters
1. The measurement object is continuous change of H, Z and D three components of geomagnetic field
2. Dynamic range: ± 2000nT
3. Resolution: 0.1nT
4. Noise: <0.1nT
5. Temperature coefficient: ≤1nT /℃
6. Frequency response: DC ~ 10Hz
7. Sampling rate: 1Hz
8. Working temperature: -15 ℃ ~ +60 ℃
9. Transmission mode: RJ-45 network port
10. Data storage capacity: > 512MB
11. Power: 9 ~ 18V DC
12. Humidity: <80%
13. Power consumption: <5W
inquiry now
We will give you a quotation within 24 hours.
-
DX-2012HC Soft Magnetic Material Coercivity Measuring Device
DX 2012HC soft magnetic material coercivity measuring device is mainly used for rapid measurement of soft materials including: pure iron and carbon steel, soft ferrite, magnetic powder and other regular and irregular open circuit samples, and the test method is reliable.
-
DX-100 Hall Effect Measurement System
DX 100 Hall effect test system can be divided into normal temperature, high temperature, low temperature, high and low temperature Hall effect test system; It is used to measure the carrier concentration, mobility, resistivity, Hall coefficient, etc. of semiconductor materials; It is an essential tool for studying the electrical properties of semiconductor materials.
-
DX-9000 Series Vibration Sample Magnetometer
DX-9000 series vibrating sample magnetometer is a kind of magnetometer developed by Xiamen Dexing Magnet Tech. Co., Ltd. The main research and development of the magnetic material measurement system is a new generation of products based on the electromagnet platform.
-
DX-2100AM Magnetization Angle Measurement System
The DX 2100AM magnetization angle measurement system is connected to the independent three component fluxmeter by a three dimensional Helmholtz coil to form a hardware test part;Through a microcomputer conversion of the test data of three components, a complete magnetization angle measurement system is formed.